Prime Tube Impex

ASTM B 466 - B 467 Cupro Nickel Tubes Manufacturer

Prime Tube offer quality ASTM B 466 - B 467 Cupro Nickel Tubes

ASTM B 466 - B 467 Cupro Nickel Tubes Manufacturer
 
ASTM B 466 - B 467 Cupro Nickel Tubes Manufacturer  

Looking for trusted vendors for ASTM B 466 - B 467 Cupro Nickel Tubes, Information for those interested in buying ASTM B 466 - B 467 Cupro Nickel Tubes

Our goal is to fulfill the highest expectations of our customers for delivery and product quality of ASTM B 466 - B 467 Cupro Nickel Tubes. Information for those interested in buying ASTM B 466 - B 467 Cupro Nickel Tubes. the most trusted source of ASTM B 466 - B 467 Cupro Nickel Tubes, More about Prime Tube Impex for all Pipes & Tubes.

ASTM B 466 - B 467 Cupro Nickel Tubes Manufacturer
ASTM B 466 - B 467 Cupro Nickel Tubes

Request for a Quote for ASTM B 466 - B 467 Cupro Nickel Tubes

Prime Tube Impex is one of the major Indian manufacturers, exporter & suppliers of ASTM B 466 - B 467 Cupro Nickel Tubes & OCTG, CRA (Corrosion-Resistant Alloy) Seamless Tubes, Stainless Steel , Super Duplex , Duplex , Welded & Semaless, Carbon Steel Seamless Pipes, Tubes, Capillary Pipes & ‘U’ Tubes for applications in oil & gas, LNG, Thermal & Nuclear Power Plants, Chemical Industries, Fertilizers Plants, (petro) chemical, shipbuilding, desalination, water treatment, energy industries, EPC and Pipes for General Engineering Purpose.

Prime Tube Impex operates according to an certified quality programme. A complete range of testing facilities on-site contributes to consistent quality control.

 

Request for a Quote for ASTM B 466 - B 467 Cupro Nickel Tubes

 

 

This specification covers welded copper-nickel alloy pipes produced from Copper Alloy UNS Nos. C70600 and C71500 for general engineering applications. Pipes may be produced in any one of the following tempers: as-welded from annealed sheets, strips, or plates (WM50); as-welded from cold-worked sheets, strips, or plates (WM00, WM01, WM02, and so forth); welded and annealed (WO50); welded, light cold drawn (WR00) or hard cold drawn (WR04), and stress relieved; or fully finished as annealed, light drawn (WH00) or hard drawn (WH04), and stress relieved. 

Standards
Cupro Nickel Tube90/ 10 Standard BS2871part3 ASTM B-111 IS 1545 JIS H 3300 NFA 51 102
Symbol CN 102 C 70600 CuNi10Fe1 C7060 CuNi10Fe1Mn
Cupro Nickel Tubes 70/30 Standard BS2871part3 ASTM B-111 IS 1545 JIS H 3300 NFA 51 102
NFA 51 102 CN 107 C 71500 CuNi30Mn1Fe C 7150 CuNi30Mn1Fe

UNS No. C71500 – BSI No. CN107 – ISO Name CuNi30Mn1Fe
Chemical Comp. (%) Cu rem / Ni 29 ~ 33 / Pb 0.05 / Fe 0.40 ~ 1 / Zn 1 max
ASTM Spec. B 111, B 359, B395, B 466, B 467, B 543, B 552
ASME Spec. SB 111, SB 395, SB 466
Applications Condenser, Evaporator and Heat Exchanger tubes; Distiller tubing; Salt Water piping.
Temper O61 Annealed / HR50 Drawn & Stress Relieved

Properties * Metric English
Density 8.94 g/cc 0.323 lb/in³
Tensile Strength min.- O61 -/- HR50 360 MPa -/- 495 MPa 52 ksi -/- 72 ksi
Yield Strength min.- O61 -/- HR50 125 MPa -/- 345 MPa 18 ksi -/- 50 ksi
CTE, linear 16.2 10-6/°C @ 20.0 – 300 °C 9.0 10-6/°F @ 70.0 – 570 °F
Specific Heat Capacity 0.09 cal/g-°C @ 20ºC 0.09 BTU/lb-°F @ 70ºF
Thermal Conductivity 29 W/m-K @ 20.0 °C 17 BTU/ft2/ft/h/°F @ 70.0 °F
Melting Point 1171 – 1238 °C 2140 – 2260 °F

Dimension Tolerance
Material Ultimate Tensile Strength1000 psi (MPa) Yield Strength 0.5% Ext.under Load 1000 psi (MPa) YElongation % in 2 in. Fatigue Strength (10x7 cycles) 1000 psi (MPa) Burst Pressure* 1000 psi (MPa)
Copper-brazed Steel 48-55 (0.330-0.380) 28-34 (0.190-0.235) 30-40 30 (
0.210)
19.5 
(0.135)
C12200-Phosphorus deoxidized Copper 32-38 (0.220-0.265) 10-14 (0.070-0.100) 45-60 10 
(0.070)
12 (
0.083)
C70600-Copper Nickel 90-10 48-54 (0.330-0.370) 16-22 (0.110-0.150) 40-55 15 
(0.100)
19 (
0.130)

This specification establishes the requirements for welded copper-nickel alloy pipe for general engineering purposes. The following alloys are covered:


Copper Alloy
UNS No.
Type of Metal
C70600 90-10 copper-nickel
C70620 90-10 copper-nickel
(Modified for Welding)
C71500 70-30 copper-nickel
C71520 70-30 copper-nickel
(Modified for Welding)

Cupro Nickel Pancake Coils

Copper-nickel brake tubing provides superior reliability and assures both manufacturers and vehicle owners improved durability for effective long-life functioning of the brake system.Coils Available in 5 mtr, 10 mtr & 15mtrs.

Copper Nickel tubes, 10% – C70600

Copper Nickel tubes, 10% – C70600 - exhibits excellent resistance to impingement attack. It is also highly resistant to SCC. This alloy is suitable for Marine condenser tube installations in place of Aluminum Brass, especially where higher water velocities are encountered.

UNS No. C70600 – BSI No. CN102 – ISO Name CuNi10Fe1Mn
Chemical Comp. (%) Cu rem / Ni 9 ~ 11 / Pb 0.05 / Fe 1 ~ 1.8 / Zn 1 max / Mg 1 max
ASTM Spec. B 111, B 395, B 466, B 552
ASME Spec. SB 111, SB 395, SB 466
Applications Condenser, Evaporator and Heat Exchanger tubes; Distiller tubing; Salt Water piping.
Temper O61 Annealed / H55 Light-Drawn

Properties * Metric English
Density 8.94 g/cc 0.323 lb/in³
Tensile Strength min.- O61 -/- H55 275 MPa -/- 310 MPa 40 ksi -/- 45 ksi
Yield Strength min.- O61 -/- H55 105 MPa -/- 240 MPa 15 ksi -/- 35 ksi
CTE, linear 17.1 10-6/°C @ 20.0 – 300 °C 9.5 10-6/°F @ 70.0 – 570 °F
Specific Heat Capacity 0.09 cal/g-°C @ 20ºC 0.09 BTU/lb-°F @ 70ºF
Thermal Conductivity 45 W/m-K @ 20.0 °C 26 BTU/ft2/ft/h/°F @ 70.0 °F
Melting Point 1099 – 1149 °C 2010 – 2100 °F

Copper Nickel tubes, 30% – C71500

Copper Nickel tubes, 30% – C71500 - has, in general, the best resistance of any of the copper alloys to impingement attack and to corrosion from most acids and waters. It is being used in severe corrosive conditions in which service lives longer than those of other copper alloys are desired.

UNS No. C71500 – BSI No. CN107 – ISO Name CuNi30Mn1Fe
Chemical Comp. (%) Cu rem / Ni 29 ~ 33 / Pb 0.05 / Fe 0.40 ~ 1 / Zn 1 max
ASTM Spec. B 111, B 359, B395, B 466, B 467, B 543, B 552
ASME Spec. SB 111, SB 395, SB 466
Applications Condenser, Evaporator and Heat Exchanger tubes; Distiller tubing; Salt Water piping.
Temper O61 Annealed / HR50 Drawn & Stress Relieved

Properties * Metric English
Density 8.94 g/cc 0.323 lb/in³
Tensile Strength min.- O61 -/- HR50 360 MPa -/- 495 MPa 52 ksi -/- 72 ksi
Yield Strength min.- O61 -/- HR50 125 MPa -/- 345 MPa 18 ksi -/- 50 ksi
CTE, linear 16.2 10-6/°C @ 20.0 – 300 °C 9.0 10-6/°F @ 70.0 – 570 °F
Specific Heat Capacity 0.09 cal/g-°C @ 20ºC 0.09 BTU/lb-°F @ 70ºF
Thermal Conductivity 29 W/m-K @ 20.0 °C 17 BTU/ft2/ft/h/°F @ 70.0 °F
Melting Point 1171 – 1238 °C 2140 – 2260 °F

Specialize in: copper nickel; pipe; welded pipe; UNS No. C70600; UNS No. C70620; UNS No. C71500; UNS No. C71520; Copper alloy pipe--specifications; UNS C70600 (Cu-Ni)--pipe/tube (seamless/welded); UNS C71500--pipe/tube (seamless/welded); Welded Cu/Cu alloy pipe

Packaging & Shipping

Utmost care is taken towards Packing of the ASTM B 466 - B 467 Cupro Nickel Tubes so as to ensure that the resultant Coils, Foils, Tubes, Pipes and Fittings reach in the same condition as desired by our valued customers.
Packing specifications for various products are:

  • Larger Dia Fusion Welded Pipes are packed with aluminium end caps in a wooden crates.
  • S.S. Automotive Exhaust Pipes & Scheduled pipes both are packed with plastic end caps in wooden crates.
  • Cold Drawn Seamless Stainless Tubes are packed with plastic end caps in a wooden box with an inside thermocoal covering.
  • Coils and Foils are packed in wooden crates.

ASTM B 466 - B 467 Cupro Nickel Tubes Packaging

Packed ASTM B 466 - B 467 Cupro Nickel Tubes

ASTM B 466 - B 467 Cupro Nickel Tubes Packaging

Packed ASTM B 466 - B 467 Cupro Nickel Tubes


Other Packaging information:
  • Bundle Packing
  • Bundle Packing
  • Wooden Case
  • Wooden Case
  • Wooden Case for U Tubes
  • Reinforced by angle bar

 

Why us?

  • ASTM B 466 - B 467 Cupro Nickel Tubes Manufacturer & Exporter since 1996
  • The annual capacity of the plant equals about 12.000 tons
  • Specialized in Pipes & Tubes, Stainless Steel Pipe & Carbon Steel Pipe
  • We export ASTM B 466 - B 467 Cupro Nickel Tubes everywhere in the world
  • We have our own warehouse of 10,000 feet, so we can offer ASTM B 466 - B 467 Cupro Nickel Tubes best price in the market

Heilights:

  • Pipes up to 24" made in continuous production from coil
  • Pipes up to 80" made from single plates
  • Maximum thickness 40 mm

Strength:

  • Contacts with major mills & stockists around the world.
  • Can offer ex-stock materials as well as mill delivery with nominal margins.
  • Complete in-house testing facilities viz. hydro, eddy current, UT, chemical analysis,
  • physical/mechanical, PMI, microscopic examination, etc…
  • Prime and genuine materials with co-relating original test certificates.

Available Stock at Prime Tube Impex

Carbon Steel Pipes & Tubes stock at a glance:

Pipes & Tubes Stock At a Glance:-
Pipe Gradewise Stock At a Glance:-
Tube Gradewise Stock At a Glance:-
Nickel Alloys Pipes & Tubes Stock At a Glance:-
Top Sellers Pipes & Tubes At a Glance:-
List of Countries where Prime Tube Impex supply ASTM A500/A500M Structural Round Tubing:-

List of Countries where Prime Tube Impex supply Pipes / Tubes :-

Please note:
ASTM A312 / A312M - 13 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

 

Search for Manufacturers Suppliers of ASTM B 466 - B 467 Cupro Nickel Tubes ends at Prime Tube Impex, we offer better quality & better price. ASTM B 466 - B 467 Cupro Nickel Tubes manufacturer, ASTM B 466 - B 467 Cupro Nickel Tubes suppliers, ASTM B 466 - B 467 Cupro Nickel Tubes exporter, ASTM B 466 - B 467 Cupro Nickel Tubes distributor, ASTM B 466 - B 467 Cupro Nickel Tubes stockists, ASTM B 466 - B 467 Cupro Nickel Tubes price

[ Buy everything in Stainless Steel Pipes & Tubes ]

ASTM B 466 - B 467 Cupro Nickel Tubes Manufacturer Process

ASTM B 466 - B 467 Cupro Nickel Tubes Manufacturer Process

Prime Tube Impex shipping ASTM B 466 - B 467 Cupro Nickel Tubes worldwide

Send Enquiry of ASTM B 466 - B 467 Cupro Nickel Tubes

Send Enquiry of Pipes & Tubes

Send Enquiry now!

website designed, developed & SEO optomized by www.mesotek.com